Info

The hedgehog was engaged in a fight with

Read More
Q&A

Why does my shower pump not kick in?

Why does my shower pump not kick in?

Provided the pump is fitted within the correct parameters. The pump would only not kick in when there is air in the system. The air will prevent a flow of water which will not trigger the pumps flow switch. Easiest way to resolve is to turn the power off to the pump and lower the shower head to attempt to clear the air.

Do you need a shower pump for low water pressure?

A shower pump is the perfect addition to any bathroom if you have been suffering from low water pressure and are in need of a more refreshing shower. What do you really know about shower pumps though?

What to do if your shower pump is blocked?

Most high quality shower pumps will come with a bleed switch. This will allow you to follow the instructions in your shower pump installation guide to bleed the pump. Failing this, you may need to contact a plumber. Blocked Pump Filters One of the most common issues with a newly fitted shower pump is blocked pump filters.

Why does a shower pump need to be connected?

It needs water passing through its system so that it can boost the pressure and push the water out in a powerful stream. The increased pressure also works against gravity as it travels upwards, which is why your overall pressure from the shower head is massively improved. How to Connect a Shower Pump?

Why is there no pressure on my shower pump?

In hard water areas it could have become clogged with limescale, or the problem could be due to a fault like a broken impeller. Unfortunately, in either of the scenarios listed above, this is probably a sign that you’ll need to replace the pump. The most common symptom of an issue with your shower pump is the lack of pressure in your shower.

Most high quality shower pumps will come with a bleed switch. This will allow you to follow the instructions in your shower pump installation guide to bleed the pump. Failing this, you may need to contact a plumber. Blocked Pump Filters One of the most common issues with a newly fitted shower pump is blocked pump filters.

When to call a plumber about your shower pump?

The most common symptom of an issue with your shower pump is the lack of pressure in your shower. If you go from an invigorating blast to a simple dribble, then you know you have an issue. Make these checks below. Please keep in mind that for some of these issues you may need to contact a plumber. Pump seals can deteriorate over time.

How long does it take to install a shower pump?

Turn the shower on and run for 5 minutes. 6. Turn the temperature to full hot and run for a further 5 minutes. 7. Turn off the shower. 8. Wait at least 20 minutes. 9. Re-power the pump and turn on the shower to test. A one time or repeated air test could solve your pump installation woes.