Info

The hedgehog was engaged in a fight with

Read More
Q&A

Why does my fridge not keep temperature?

Why does my fridge not keep temperature?

Blocked thermostat sensors can result in a refrigerator getting too cold or too warm. If food containers or jars and bottles are too close to the fridge’s thermostat, they can make it less functional. Placing warm food containers by the thermostat will result in the fridge getting too cold.

How do I reset my GE Profile Arctica refrigerator?

How to Reset a GE Profile Arctica

  1. Disconnect the power to the Arctica refrigerator and wait 30 seconds. Restore power.
  2. Replace the household fuse or reset the circuit breaker if unplugging the refrigerator does not reset the controls.
  3. Perform a complete system reset by using the refrigerator’s self-diagnostic mode.

Is there a reset button on a GE side by side refrigerator?

General Electric (GE) refrigerators do not have a dedicated reset button, but you can, however, reset your refrigerator in the event of a technical problem.

What is the best setting for a GE refrigerator?

Recommended control settings are 0°F for the freezer and 37°F for the fresh food compartment. To view or adjust the current temperature settings, press the Freezer or Fridge pads or “Warmer” or “Colder” pads (depending on the model) until the desired temperature setting is displayed.

Where is the power switch on a GE refrigerator?

The shutoff switch is a small device located inside the freezer. Open the freezer of your GE refrigerator to find this switch. Turn it off and wait for about 30 seconds before turning it back on.

What should the temperature be on GE Profile Arctica refrigerator?

Handily, the GE Profile Arctica refrigerator tells you the ideal temperatures for refrigerating and freezing your food right on the temperature controls. For the fridge, it’s 37 degrees Fahrenheit, but can be adjusted between 34 and 44 degrees Fahrenheit, with the food-safe temperature being under 40 degrees Fahrenheit.

Why is my ge Arctica water dispenser not working?

This will cause the green light on the icemaker to blink and the icemaker will not make ice. If you find your GE Arctica refrigerator water dispenser not working, first check to make sure that the water supply line is connected to the water in your house and that the GE Arctica water filter is not clogged.

How do you set the temperature on a GE refrigerator?

To enter the self-diagnostic mode, press the temperature button on the control panel. When both temperature displays become lit up, set the freezer and refrigerator to level ‘5′. Then, use your fingers to press the four temperature setting buttons for 3 seconds. Afterward, you’ll notice the number 0 flash in the electronic display.

Why is my ge refrigerator not turning on?

If you haven’t heard the hum of your GE refrigerator model GSS25SGMBS running in a while and the temperature inside the appliance is rising, a malfunction is most likely preventing the compressor from turning on. Unfortunately, there are quite a few potential component failures that can cause the part to no longer work.

How to troubleshoot GE Profile Arctica refrigerator problems?

Temperature troubleshooting steps: Check the temperature controls. The coldest setting will cause the motor to run more often. Check the temperature control if the interior of the fridge or freezer is too warm. Select a cooler setting if necessary. Check for a large amount of food in the refrigerator.

Where does the temperature adjustment go on a GE refrigerator?

The freezer setting determines the compressor and freezer fan running times. On models where you press Fridge or Freezer to adjust the temperature (doesn’t have separate up and down arrows), the temperature adjustment only goes one direction.

This will cause the green light on the icemaker to blink and the icemaker will not make ice. If you find your GE Arctica refrigerator water dispenser not working, first check to make sure that the water supply line is connected to the water in your house and that the GE Arctica water filter is not clogged.

What to do if you have a problem with your GE refrigerator?

When you have GE refrigerator problems, our troubleshooting guide helps you figure out what’s wrong and tells you how fix it. Yourself. So you don’t have to wait around for a refrigerator repair person or pay one, either. Just read through the list of symptoms below and click on the one that best matches the problem.