Info

The hedgehog was engaged in a fight with

Read More
Q&A

Where can I discharge water from my sump pump?

Where can I discharge water from my sump pump?

Discharge the sump pump water into a dry well. You can also harvest rainwater if it’s the cause of your stagnant water. 2. Use a French Drain

Can a primary sump pump be used as a back up pump?

Your primary pump may become overwhelmed by the water volume during serious storms. If the water rises high enough to actuate the back-up pump, it can provide extra relief to the primary sump pump. You also have the option of wiring a back-up battery directly to your existing sump pump.

Why does a sump pump have a cavitation problem?

Pump cavitation is a problem created by a high elevation difference between the fluid surface and the pump. These pumps apply atmospheric pressure, and they use a pressurized fluid that is on the surface in order to drive the hydraulic motor down hole.

When is it time to replace your sump pump?

A sump pump with an unusually loud motor indicates that the motor is reaching the end of its life. If you have an older, plastic pump, it’s time to get a new system altogether. Consider upgrading to a cast-iron, self-lubricating pump. These pumps are more reliable and require less intensive maintenance.

Discharge the sump pump water into a dry well. You can also harvest rainwater if it’s the cause of your stagnant water. 2. Use a French Drain

What’s the best way to start a sump pump?

That’s easy — just pour water in. Take a 5-gallon bucket filled with water, and then slowly pour the water in (think about the rate which rain water may enter the pump) until the float triggers your pump to activate.

What happens when you unplug a sump pump?

In order to plug up said item, they accidentally unplug your sump pump… and forget to plug it back in. Fortunately, this one is a simple fix: always check to make sure you plug the sump pump back up. Or, better yet, never unplug it. Mistake #7: Failing to check for loose wiring in your system.

Pump cavitation is a problem created by a high elevation difference between the fluid surface and the pump. These pumps apply atmospheric pressure, and they use a pressurized fluid that is on the surface in order to drive the hydraulic motor down hole.