Info

The hedgehog was engaged in a fight with

Read More
Tips

What tools do I need to replace a toilet?

What tools do I need to replace a toilet?

Tools

  1. slip-joint pliers.
  2. open-ended wrench.
  3. screwdriver.
  4. sponge.
  5. adjustable wrench.
  6. rag.
  7. needlenose pliers.
  8. gloves.

What size wrench Do I need to replace my toilet?

Metal seat bolts: The deep-well socket option If the bolts are metal, you might be able to unscrew the nuts with a pliers, but the best tool for this job is a socket wrench equipped with a deep-well socket (Photo 1). Most toilet seats require a 1/2-in. socket.

How do you stick a broken toilet?

How to Glue a Broken Piece on a Toilet Tank

  1. Flush the toilet to drain the tank if the repair is to be made to the tank itself.
  2. Wash the break on both pieces, using a solution of dish soap and water.
  3. Spread ceramic glue along the break, using the supplied applicator.

Can you fix a broken toilet?

Fixing the Cracked Toilet Hairline cracks normally do not require replacement if they are around the outside of the tank or bowl. If you see cracks like this, you should seal them with plumbing epoxy. Some cracks inside the tank can be repaired too, but they must be under 1/16-inch wide.

What can I use to remove broken toilet flange?

If you need to remove a broken, rusted, or separated toilet flange, or want to remove a seemingly impossible female pipe fitting, having the right tool for the job makes the task a whole lot easier. Save yourself some time and frustration with this ingenious, effective pipe fitting removal tool and make short work of a normally challenging process.

What’s the best way to replace a toilet?

How to Replace a Toilet 1 Measure for a New Toilet. Measure from your back wall to the closet bolts that secure the toilet to the floor. 2 Remove the Old Toilet. Once you have the new toilet, start removing the old one. 3 Install the New Toilet. Once you’ve ensured the flange is in good shape, the next step is toilet installation. …

What to do if your toilet pipe is broken?

Repair kits are available to fix a broken flange. Replacement flanges are also available to fit inside the pipe and create a tight seal. The flange should be a little higher than your finished floor. However, if you’re adding new flooring, your flange could be too low.

Do you need a helper to remove a toilet?

If you need to replace an old toilet, repair a toilet flange or install new bathroom flooring, you’ll need to know how to remove a toilet. Removing a toilet is a relatively simple project that most DIYers can tackle either alone or with a helper. This guide will give you step-by-step instructions on how to remove a toilet.

What’s the best way to replace a toilet flange?

Option 1: Rest the toilet bowl on its side (place it on a towel or cloth to protect the floor) and attach the replacement wax ring to the bottom of the bowl. This technique helps ensure the ring is in the proper position when placing the toilet over the flange. Option 2: Center the wax ring over the flange before lowering the bowl into place.

What’s the best way to fix a broken toilet?

One way to accomplish this is to use a plunger and force as much down the drain as you can. Another way is to use a small, disposable cup and bail the water out. If you choose the latter option make sure to wear latex gloves and thoroughly wash your hands afterwards. Pry off the caps to the flange bolts.

If you need to replace an old toilet, repair a toilet flange or install new bathroom flooring, you’ll need to know how to remove a toilet. Removing a toilet is a relatively simple project that most DIYers can tackle either alone or with a helper. This guide will give you step-by-step instructions on how to remove a toilet.

What’s the best way to replace a toilet ring?

Run the wax ring under warm water to soften it, and gently press it onto the toilet outlet. Toilets usually include a wax ring. However, it’s best to purchase a backup wax ring in case of damage during installation. You can also use a wax-free ring.