Info

The hedgehog was engaged in a fight with

Read More
Lifehacks

What do you need to know about a water heater inspection?

What do you need to know about a water heater inspection?

Water heater inspection – cold water supply line and a shutoff valve. There must be a water shutoff valve installed ONLY on a cold / inlet line of the water heater. This is required for the emergency and servicing purposes; so the water flow can be easily turned off in case of a leak or appliance servicing.

What should I expect during a plumbing inspection?

Even your water lines should be covered. While your water heater and toilets will receive special attention, an experienced plumber looks to examine the complete health of your system. That means testing for proper water pressure.

When do you need a plumber for your water heater?

While your water heater and toilets will receive special attention, an experienced plumber looks to examine the complete health of your system. That means testing for proper water pressure. After all, too much pressure can damage your plumbing, and too little can leave your home with dysfunctional water appliances.

What do you need to know about a draft water heater?

Venting a furnace that utilizes induced draft motor and a natural draft water heater into a common vent requires “Y” shaped connection. This is required to prevent exhaust gases from the furnace from being pushed back into the house through the water heater’s vent pipe / draft hood.

Water heater inspection – cold water supply line and a shutoff valve. There must be a water shutoff valve installed ONLY on a cold / inlet line of the water heater. This is required for the emergency and servicing purposes; so the water flow can be easily turned off in case of a leak or appliance servicing.

What do BB and PVC inspectors look for in a boiler?

Pre-Inspection Checklist for Hot Water Heating or Hot Water Supply Boilers Notice: This checklist reflects the most common violations BB&PVC field inspectors encounter when performing an inspection on low pressure hot water heating and supply boiler installations.

How to schedule a plumbing inspection in Baltimore?

A. You must use Inspection Connection, where you will be able to schedule, reschedule or inquire about an inspection, or you can call 410-887-4638 and follow the prompts. You will need: You and your contractor should coordinate your inspection requests so they can be provided in a timely manner.

What do you need to know about a plumbing permit?

Call for an inspection before covering any piping with floor, wall, or ceiling. Piping includes water, sewer, storm water or vent system. The inspector will test all piping (typically with water). You will need a final inspection of all finished fixtures or plumbing to close out the permit.