Info

The hedgehog was engaged in a fight with

Read More
Lifehacks

Is it easy to replace a pool pump?

Is it easy to replace a pool pump?

For a skilled pool technician selecting the right pump and installing it in the pool system is a simple and straight forward job. No part of installing a new pool pump is prohibitively difficult however it does require making electrical connections as well as plumbing connections.

How long should I run my pool pump every day?

8 hours a
Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.

When do you need to replace a pool pump motor?

If you have an older pool pump or it’s motor is running loud or just stop working, you may may want to consider replacing your pool pump motor. You do not have to replace the whole pool pump and as this guide will show, replacing your pool pump motor is not that difficult.

What to use to replace pipe in front of pool pump?

Another way around the issue of limited space on the pipe in front of the pump is to cut a regular sized coupling down by sawing off 1/2″ on each side. Rubber couplings can be used, but are prone to leak and collapse when placed so close to the pump intake.

Can a coupling be replaced on a pool pump?

Using a nipple (a pipe that is threaded on one or both ends), instead of an MTA fitting can be useful, and can save about 1/2″ of space. Installing a union instead of a coupling can also be done, and if the repair needs to be redone in the future, you can just replace the union-half that’s on the pump side, and be back in business in minutes.

What happens if your swimming pool pump fails?

Stagnant water is a recipe for disaster. When your pump is working, it keeps your pool’s water fresh and healthy. But if it fails, it won’t be long before your beautiful, clear pool turns into a festering swamp. So it pays to know the signs you’re in need of a swimming pool pump replacement.

What to look for when replacing a pool pump?

First, we want to cut the pipe that comes into the old pump. Look for a place to cut the pipe that will leave at least 1.5″ of free or exposed pipe that is not covered by a coupling or other fitting. This will allow you some pipe to connect the new pump plumbing fittings.

How do you remove an old pool pump?

Remove the Old Pool Pump. First, we want to cut the pipe that comes into the old pump. Look for a place to cut the pipe that will leave at least 1.5″ of free or exposed pipe that is not covered by a coupling or other fitting. This will allow you some pipe to connect the new pump plumbing fittings.

Using a nipple (a pipe that is threaded on one or both ends), instead of an MTA fitting can be useful, and can save about 1/2″ of space. Installing a union instead of a coupling can also be done, and if the repair needs to be redone in the future, you can just replace the union-half that’s on the pump side, and be back in business in minutes.

How do you install a new pool pump?

Let’s start with a materials list, to install a new pool pump, gather these items: Remove the Old Pool Pump. First, we want to cut the pipe that comes into the old pump. Look for a place to cut the pipe that will leave at least 1.5″ of free or exposed pipe that is not covered by a coupling or other fitting.