Info

The hedgehog was engaged in a fight with

Read More
Guidelines

How to replace the water valve behind the laundry machine?

How to replace the water valve behind the laundry machine?

Tighten it with a wrench, turn on the water and check for leaks before you hook up the supply hose for the washing machine. When the valves are installed in a plastic laundry box, you have to cut out a rectangular section of the wall to get to the connections.

Can a valve be replaced on a washing machine?

Replacing a Washing Machine Shut-Off Valve Can Be Easy If the connections to the shut-off valves are visible, and you can see that they are threaded, you should be able to replace the valves using only a pipe wrench. Begin by shutting off the water to the laundry room – hot, cold or both depending on which valve you’re replacing.

How do you replace a water supply valve?

If you have a threaded valve, all you need to do is twist it off the supply pipe. Affix a pipe wrench to the flat sides where the valve body connects to the pipe. Rotate it counter-clockwise to loosen and remove it. Remember to shut the water off before attempting to replace the valve.

How do you fix a leaking washer water valve?

1 – To repair certain types of washer water valves, first turn off the leaky valve with the handle. Use a crescent wrench and tighten the nut (clockwise) at the base of the stem while holding the handle in place. 2 – Open and close the valve multiple times.

How do you replace a washing machine valve?

How to Replace a Washing Machine Shut-off Valve Step 1 – Unplug the Washing Machine Power Cord Step 2 – Turn off the Water Supply to the Laundry Room Step 3 – Shut off the Locate the Shut-off Valve Step 4 – Remove the Water Hoses from the Water Valve Step 5 – Open the Control Panel of the Washing Machine Step 6 – Disconnect the Wires from the Valve

How do you fix a leaking water valve?

The easiest way to fix a leaking washer water valve is to replace the o-rings or bushings. This is an easy fix and involves turning off water, disassembling the valve, and replacing the old worn out o-rings, bushings, or Teflon rings.

How does a washing machine water supply valve work?

The water inlet valve has two threaded ports that are connected to hot and cold water hoses at the back of the washing machine. Each port is controlled by a solenoid valve that sends electric power to open and close the flow of hot and cold water based on settings for the wash temperature and signals from the water-level switch.