The hedgehog was engaged in a fight with

Read More

How do you unblock a new build toilet?

How do you unblock a new build toilet?

To unblock a toilet, mix it with white vinegar and water to start a chemical reaction. This mixture is great for cleaning, descaling and removing soap residues. It’s also a really effective way of deodorising waste pipes.

Do you need a plumber to fix a clogged toilet?

A clogged toilet is probably one of the most common toilet problems you’ll encounter, but in most cases, there is no reason to call a plumber. A specialized toilet plunger with an internal cup or flange will handle most clogs. Stubborn clogs may require a special drain snake tool, called a closet auger or toilet auger .

What to do when your toilet tank won’t fill up?

Turn off water supply and flush the tank. Reach inside the tank with your right hand under the float cup and lift it up. With your right hand hold onto the gray shaft keeping the float cup all the way up. Do not allow the float cup to drop or valve shaft to turn.

Why is the water coming out of my toilet tank?

Fixing a running toilet is relatively easy to do. The problem occurs either because the flapper is not seating itself correctly in the opening of the flush valve, or because the water level in the tank is too high and allows water to flow over the top of the overflow tube and down into the tank.

Why does my toilet get clogged when I flush?

Toilet paper, paper towels, and a variety of non-flushable items can clog the trap and cause a backed-up toilet. More than one toilet has become clogged when a pocket comb became lodged in the internal trap. A few minutes with a plunger should loosen any blockage and remove the clog.

What should I do if my toilet plunger is not working?

When using a plunger, make sure the toilet bowl contains enough water to submerge the head of the plunger. Place the plunger over the hole in the toilet bowl, maintain a seal and plunge up and down rapidly, keeping the plunger under the water level. Be prepared for multiple plunge cycles or dozens of plunges per cycle.

How do you fix a clogged toilet vent?

To fix this issue, climb to the top of the roof using a ladder, with garden hose in hand. Have someone turn the water on and pour the water down the vent stack. The water will unclog the vent and wash down anything that could be clogging it. A clogged vent stack can also cause a weak flushing toilet.

What should I do if my toilet is gurgling?

If you plunge the toilet and don’t bring up a clog or the problem continues, try snaking your drain through the toilet bowl. A drain snake (auger) is something every homeowner should have in their plumbing toolbox. A standard snake can reach 5 to 15 feet into your drain and clear many of the clogs a plunger can’t.

What should I do if I have a problem with my toilet?

Inspect the area where you’ll be working to identify the toilet problem. Have a bucket or towels on hand to catch or wipe up water. Frequently when working with plumbing parts and repair matters, you’ll need to turn off the water supply valve and flush the toilet to empty the tank. Disconnect the supply line from the tank.