Info

The hedgehog was engaged in a fight with

Read More
Trending

How do you change a diverter faucet?

How do you change a diverter faucet?

Diverter Valve on a Three-Valve Shower

  1. Loosen the screw on the handle.
  2. Unscrew and remove the handle.
  3. Remove the sleeve over the diverter.
  4. Remove the diverter using a socket wrench.
  5. Unscrew the set screw.
  6. Unscrew spigot from the wall.

How do you remove tub spout from Moen faucet?

Unthread the tub spout counter-clockwise to remove. Loosen the Hex screw until the tub spout slides off. For additional information on Moen products visit solutions.moen.com and select the type of faucet you are repairing.

Where does the diverter gate go on a Moen faucet?

The diverter gate (#4) goes into the bottom of the tub spout (#2) with the installed washer (#3) facing the wall. Snap the tabs of the diverter gate (#4) onto the lift rod (#1). For additional information on Moen products visit solutions.moen.com and select the type of faucet you are repairing.

How to identify my Roman tub STEM extension-Moen solutions?

For additional information on Moen products visit solutions.moen.com and select the type of faucet you are repairing. The faucet guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product. Still Not Finding What You’re Looking For?

How do you remove an O ring from a kitchen faucet?

Shut off the water to the faucet beneath the sink. Examine the handle of the faucet where the O – ring is located. Use the appropriately-sized hex wrench to remove the hex screw holding the faucet handle in place. Pull the old O – ring off of the valve body, and discard it. Click to see full answer.

How can you tell when Moen parts need to be replaced?

The best way to figure out what replacement part or accessory you need is if you know the “Model Number” of your Moen product. Once you know this, the replacement part or accessory can be identified using the product’s “Exploded Parts View” pdf document that can be found on the product’s website page.

Where can I Find my Moen faucet model number?

Your model number can be found on the box in which your product was packaged. Sometimes it can be found on the instruction manual included with the product. If the model number is unavailable, the series number will be helpful when used in conjunction with the faucet images shown in our replacement part locator.

What should I do to my Moen valve spout?

Remember to clean the inside of the spout and the outside of the valve body when replacing the o-rings, as well as lubricating the o-rings with silicone-based grease (Moen part number 99915). Inspect the retainer nut on top of the spout (if applicable). Make sure it is not overly tightened.

Where can I buy Moen shower head parts?

Replacement parts, filters, cartridges and accessories are just a click away. Genuine Moen parts are designed to extend the life of your faucets. Your Moen faucet or shower head may also work with specialized parts and accessories for optimal performance. For service and support call 1-800-BUY-MOEN