Info

The hedgehog was engaged in a fight with

Read More
Miscellaneous

How can I improve the water in my shower?

How can I improve the water in my shower?

How to increase water pressure in the shower

  1. Clean your shower head.
  2. Replace the shower head.
  3. Install a shower pump.
  4. Installing a pressurised unvented cylinder.
  5. Install an electric shower with a cold water accumulator tank.
  6. Install a power shower.

Why has my shower pressure dropped?

One of the simplest reasons for the lose of shower pressure is a blocked shower head. Shower heads accumulate mineral residue when the shower head is in use. Which then results in water struggling to push through the shower nozzle, hence slowly reducing the water flow level and therefore your water pressure.

Why is my shower not mixing with the shower water?

Once the water temperature is as hot as you’d like, replace the faucet head. If your problem wasn’t the anti-scalding device, your shower mixing valve has most likely gone bad and is preventing hot water from mixing properly into your shower water.

What should I do if my shower water is not hot?

Unless you have access to the shower plumbing behind the wall, this is a difficult do-it-yourself remedy, and a professional plumber is recommended to fix this problem. Consider your time of use. If the kids are taking showers right before you do, they may have used up all of the hot water.

Why is it so difficult to get my shower temperature just?

One tap to the left and scalding hot water has you hugging the shower wall. The problem could just be an old, faulty shower lever, in which case you should try replacing it. But if you have a relatively new faucet, take a quick look at your shower set up. Is there a single-control lever?

Why do I get cold water when I Turn on the shower?

One touch to the right and you’re blasted with cold water. One tap to the left and scalding hot water has you hugging the shower wall. The problem could just be an old, faulty shower lever, in which case you should try replacing it. But if you have a relatively new faucet, take a quick look at your shower set up. Is there a single-control lever?

Why do I have no water coming through my shower head?

If there is little hot water coming through the shower, but the cold water pressure is fine, the problem will be related to the hot water unit. Again, check out the hot water taps in the house and if the hot water pressure is fine to those taps, it will the washers in the hot tap of the shower that will need to be replaced.

Once the water temperature is as hot as you’d like, replace the faucet head. If your problem wasn’t the anti-scalding device, your shower mixing valve has most likely gone bad and is preventing hot water from mixing properly into your shower water.

What to do if your shower water isn’t Hot?

If you think it may be a hot water usage issue, simply wait about 30 minutes after the last person took their shower before you take yours. This should be enough time for the next batch of water to heat up, which you can then use for your shower.

Why do I have a problem with my shower diverter?

If the diverter valve is malfunctioning, or if the hose is restricted, the switching back and forth from spray head to sink spout may be problematic. The cause could also be uneven water flow or just water at low pressure.