Info

The hedgehog was engaged in a fight with

Read More
Popular

Do you need a sump pump for your home?

Do you need a sump pump for your home?

Your home may or may not require a sump pump. Needing a sump pump depends on a variety of things: your home’s age, where you live, and your area’s water table level. In the midwest, sump pumps are typically standard.

How does a sump pump work in a basement?

Sumps and Drainage Go Hand-in-Hand. A sump pump works best if there is a drain tile installed internally along the internal perimeter of the basement, or externally. A basement drainage system should be designed to collect water and channel it via gravity toward the sump pump and discharge it into the pit.

How to connect sump pump to home assistant?

Connect your TP Link HS110 in-line with the primary sump pump power connection like this: Add the TP Link switch to Home Assistant following the directions on the integrations page. I went ahead and created a new template sensor to seperate the wattage value from the attributes of the switch itself. And we end up with a sensor like this:

What to do if your sump pump overflows?

If your power goes out and your sump overflows, you don’t want your backup battery to get fried from its overflow of water. Make sure an outlet is near your primary system and is mounted well above floor level. Avoid running extension cords across your basement from a sump pump motor to an outlet.

Sumps and Drainage Go Hand-in-Hand. A sump pump works best if there is a drain tile installed internally along the internal perimeter of the basement, or externally. A basement drainage system should be designed to collect water and channel it via gravity toward the sump pump and discharge it into the pit.

What happens if you have an open sump pump?

An open sump pump is not just a sad sight, it’s also more likely to clog up. If your sump doesn’t have a lid – something we see every day in basements across the nation – it will get clogged and dirty over time and either slow down or stop entirely.

What causes a sump pump to go on overdrive?

Here are the most common causes of a sump pump on overdrive: Stuck sump pump switches – Especially in cheaper models, the float switch can become clogged or tangled (see #3 above). In some cases, the vibrations of a running sump pump can cause it to lean on the edge of the pit or liner, disabling the sump pump switch.

What should I do if my sump pump freezes?

When discharge lines become frozen or clogged, the system fails. Discharge lines should be clear and covered. Your goal is to make sure your discharge lines can transport water out of the basement and far away from your foundation even during the winter. What to Do: Ensure your sump’s discharge line can’t freeze up and stays clear.